phillipr
08-28-2002, 01:07 AM
Some of you may use a library system that has incrementally
issue of component /1 /2 ect.
If you are working on a current board and the part gets up issued
You will not be aware Unless you do the following.-
To check that the schematic has the latest Library parts in the design Synchronise the Schematic to a new Pcb.
(When you Synch to your current job any components that it finds in the Pcb it will not search for in the Library.)
This will pull in all new library parts and let you know which parts in the schematic are obsolete.
issue of component /1 /2 ect.
If you are working on a current board and the part gets up issued
You will not be aware Unless you do the following.-
To check that the schematic has the latest Library parts in the design Synchronise the Schematic to a new Pcb.
(When you Synch to your current job any components that it finds in the Pcb it will not search for in the Library.)
This will pull in all new library parts and let you know which parts in the schematic are obsolete.