robertxhu
05-29-2002, 01:24 PM
Hi
I am also using Cadstar. I meet some difficulties when I input my DOS version schematic initial data format file (*.csi files) into the Cadstar for window v4. In Cadstar’s older DOS version (SCM version MK01.1I), they use “U1-A /.SN74LS06” as symbol name (“U1-A”) and part name (“SN74LS06”) and “/.” between them. But in the later DOS version 7, they change this definition to something else. When I import my .CSI file into the v4 program. I can import all the schematic detail except the definition of “symbolName /.partName”. These lines are unacceptable during the file import. If I delete these lines form the CSI file, the v4 can import the schematic but without symbol name and part name. And the v4 only supports DOS version 7’s CSI file input.
So is anyone can email a CSI file in later DOS format to me?
Many Thanks In Advance
Robert Hu,
Electrical Engineering
Scale-tron Inc.
robertxhu@hotamil.com
I am also using Cadstar. I meet some difficulties when I input my DOS version schematic initial data format file (*.csi files) into the Cadstar for window v4. In Cadstar’s older DOS version (SCM version MK01.1I), they use “U1-A /.SN74LS06” as symbol name (“U1-A”) and part name (“SN74LS06”) and “/.” between them. But in the later DOS version 7, they change this definition to something else. When I import my .CSI file into the v4 program. I can import all the schematic detail except the definition of “symbolName /.partName”. These lines are unacceptable during the file import. If I delete these lines form the CSI file, the v4 can import the schematic but without symbol name and part name. And the v4 only supports DOS version 7’s CSI file input.
So is anyone can email a CSI file in later DOS format to me?
Many Thanks In Advance
Robert Hu,
Electrical Engineering
Scale-tron Inc.
robertxhu@hotamil.com