coffin
06-25-2008, 07:21 PM
CS8361YDWR20 pdf and datasheet: http://www.chinaicmart.com/series-CS8/CS8361YDWR20.html
The CS8361 is a precision micro- The second output tracks the 5V power dual voltage regulator with standby output through an external RESETENABLE and. adjust lead, and can supply loads of 250mA with a typical dropout The 5V standby output is accurate voltage of 400mV. The logic level within °?2% while supplying load lead is used to control ENABLE of 100mA and has a typical this tracking regulator output. dropout voltage of 400mV. Quiescent current is low, typically Both outputs are protected against 140PAA with a 300PAA load. T overvoltage, short circuit, reverse RESEactiveoutput monitors the battery and overtemperature condi-5V standby output and holds tions. The robustness and low qui-theline low during power- escent current of the CS8361 make RESET up and regulator dropout condiit not only well suited for automotions. Thecircuit includes tive microprocessor applications,RESET hysteresis and is guaranteed to but for any battery powered micro operate correctly with 1V on the processor applications. standby output
The CS8361 is a precision micro- The second output tracks the 5V power dual voltage regulator with standby output through an external RESETENABLE and. adjust lead, and can supply loads of 250mA with a typical dropout The 5V standby output is accurate voltage of 400mV. The logic level within °?2% while supplying load lead is used to control ENABLE of 100mA and has a typical this tracking regulator output. dropout voltage of 400mV. Quiescent current is low, typically Both outputs are protected against 140PAA with a 300PAA load. T overvoltage, short circuit, reverse RESEactiveoutput monitors the battery and overtemperature condi-5V standby output and holds tions. The robustness and low qui-theline low during power- escent current of the CS8361 make RESET up and regulator dropout condiit not only well suited for automotions. Thecircuit includes tive microprocessor applications,RESET hysteresis and is guaranteed to but for any battery powered micro operate correctly with 1V on the processor applications. standby output