jbrush
04-25-2008, 10:24 AM
I use Power PCB 3.51 and don't do much layout work anymore, but a small job has come up that requires an ISA board.
I could use the few $$$, but I don't have a library part or decal for an ISA connector, so I am wondering if anyone has one, if there is one on this site I can use, or a suggestion as to where to get all the specs I need to start one from scratch.
I am referring to the ISA board edge connector with the pins already located properly, not the pinout of the connector on the Motherboard. Just prefer to get it right the first time, as I have not been doing PC layout very often lately, and don't wish to mess it up because I forgot some details.
Sure would appreciate any help.
Thanks very much
John
I could use the few $$$, but I don't have a library part or decal for an ISA connector, so I am wondering if anyone has one, if there is one on this site I can use, or a suggestion as to where to get all the specs I need to start one from scratch.
I am referring to the ISA board edge connector with the pins already located properly, not the pinout of the connector on the Motherboard. Just prefer to get it right the first time, as I have not been doing PC layout very often lately, and don't wish to mess it up because I forgot some details.
Sure would appreciate any help.
Thanks very much
John