Connectors

[OLY29]

Any one have information on Foxconn connectors. The board I am designing has 2 Foxconn connectors. 1 right angle PCI and 1 smt PCMCIA connector. The PCMCIA connector is 2 piece with a gnd strip that mounts to the board. I am also looking for a 25 pin d-sub that is smt with all of the pins in one row. I have one more connector to find and that is a SO-DIMM that is smt and mounts the card at about a 15 degree angle. Any help out there.
Thanks
Steve

[Tom]

Steve,

The best thing that you can do is find an AMP or Molex equivalent. We have over 6,000 AMP & Molex connectors already built in the pcbstandards libraries. If you can find the equivalent you can copy the part to a new decal name and part-type.

Send me your PDF data sheets and I will help you find the equivalents if you need help.

[OLY29]

Tom I found most of the connectors today at DDKconnectors.com. Nice site for different connectors. I was able to down load .PDF files for all but the right angle PCI connector.
Thanks
Steve

[Tom]

Steve,

Are you saying that www.DDKconnectors.com has PowerPCB library decals? pcbstandards.com already has the PowerPCB decals and part-types ready to use. No library construction is necessary.

[OLY29]

Tom I couldn't find some of the connectors on the Pads library files.So I am making my own from the PDF files.
Thanks
Steve