Library Part Documentation

[randychase]

All the following are PDFs

All the links are downloadable PDFs that contain both the metric and inch based dimensions for the PCBstandards library parts.

These can be printed on paper using a color printer to create a very useful reference tooll.

[randychase]

Chip SM Caps (http://www.cpdserver.com/pcbstandards/Mentor/docs/capc.pdf)

SM Alum Electrolytic Caps (http://www.cpdserver.com/pcbstandards/Mentor/docs/capae.pdf)

Tantalumn SM Caps (http://www.cpdserver.com/pcbstandards/Mentor/docs/capt.pdf)

SM Tantalum CWR06 Caps (http://www.cpdserver.com/pcbstandards/Mentor/docs/capcwr06.pdf)

[randychase]

Chip Resistors (http://www.cpdserver.com/pcbstandards/Mentor/docs/resc.pdf)

MELF Resistors (http://www.cpdserver.com/pcbstandards/Mentor/docs/resmelf.pdf)

[randychase]

DO-214 Diodes (http://www.cpdserver.com/pcbstandards/Mentor/docs/diodo214.pdf)

SOD Diode (http://www.cpdserver.com/pcbstandards/Mentor/docs/diosod.pdf)

Diode, MELF (http://www.cpdserver.com/pcbstandards/Mentor/docs/diomelf.pdf)

Diodes, SMA, SMB, and SMC (http://www.cpdserver.com/pcbstandards/Mentor/docs/diosmabc.pdf)

[randychase]

Chip Inductors (http://www.cpdserver.com/pcbstandards/Mentor/docs/indc.pdf)

[randychase]

SOT-23s (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot23.pdf)

5 PIN SOT-23s (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot23-5.pdf)

6 PIN SOT-23s (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot23-6.pdf)

8 PIN SOT-23s (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot23-8.pdf)

SOT-26A (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot26a.pdf)

SOT-143 & SOT-343 (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot143.pdf)

SOT-143R & SOT-343R (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot143r.pdf)

SOT-223 (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot223.pdf)

SOT-223-4 (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot223-4.pdf)

SOT-223-5 (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot223-5.pdf)

SOT-323 (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot323.pdf)

SOT-363 (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot363.pdf)

SOT-404 (http://www.cpdserver.com/pcbstandards/Mentor/docs/sot404.pdf)

SOT-89N (http://www.cpdserver.com/pcbstandards/Mentor/docs/n_sot89.pdf)

[randychase]

T0-236 (http://www.cpdserver.com/pcbstandards/Mentor/docs/to236.pdf)

T0-252 (DPAK) (http://www.cpdserver.com/pcbstandards/Mentor/docs/to252.pdf)

T0-263 2 PIN (http://www.cpdserver.com/pcbstandards/Mentor/docs/to263-2.pdf)

3-15 pin T0-263 Devices (http://www.cpdserver.com/pcbstandards/Mentor/docs/to263-x.pdf)

T0-220DD 7 PIN device (http://www.cpdserver.com/pcbstandards/Mentor/docs/to220dd-7.pdf)

[randychase]

Standard SOs, 8-36 pin, 1.27mm/50mil spacing (http://www.cpdserver.com/pcbstandards/Mentor/docs/so.pdf)

[randychase]

Standard SOP devices, 6-44 pin, 1.27mm (0.050") spacing (http://www.cpdserver.com/pcbstandards/Mentor/docs/sop.pdf)

Standard SOP devices, 32 pin, 1mm spacing (http://www.cpdserver.com/pcbstandards/Mentor/docs/sop1.pdf)

Standard SOP devices, 16-64 pin, 0.80mm spacing (http://www.cpdserver.com/pcbstandards/Mentor/docs/sop8.pdf)

Standard SOP devices, 8-38 pin, 0.65mm spacing (http://www.cpdserver.com/pcbstandards/Mentor/docs/sop65.pdf)

Standard SOP devices, 8-64 pins, 0.635mm (0.025") spacing (http://www.cpdserver.com/pcbstandards/Mentor/docs/sop635.pdf)

Standard SOP devices, 40 & 80 pin, 0.5mm spacing (http://www.cpdserver.com/pcbstandards/Mentor/docs/sop1.pdf)

[randychase]

1.27mm (.050") spacing, 24-32 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/sopt127.pdf)

1mm Spacing, 6 pin (http://www.cpdserver.com/pcbstandards/Mentor/docs/sopt1.pdf)

0.80mm spacing, 32-54 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/sopt8.pdf)

0.65mm spacing, 8-38 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/sopt65.pdf)

0.55mm spacing, 28 pin (http://www.cpdserver.com/pcbstandards/Mentor/docs/sopt55.pdf)

0.50mm spacing, 8-86 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/sopt5.pdf)

0.40mm spacing, 14-60 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/sopt4.pdf)

0.30mm Spacing, 36-76 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/sopt3.pdf)

[randychase]

SSOP 0.65mm and 0.95mm spacing, 5 pin (http://www.cpdserver.com/pcbstandards/Mentor/docs/ssop5-p.pdf)

[randychase]

SOJ 300mil body, 14-32 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/soj300.pdf)

SOJ 350mil body, 14-28 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/soj350.pdf)

SOJ 400mil body, 14-44 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/soj400.pdf)

SOJ 450mil body, 14-28 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/soj450.pdf)

[randychase]

Square PLCC, 20-124 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/plccs.pdf)

Rectangular PLCC, 18-32 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/plccr.pdf)

PLCC Square Sockets, 20-84 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/plccss.pdf)

PLCC Rectangular Socket, 32 pin (http://www.cpdserver.com/pcbstandards/Mentor/docs/plccrs.pdf)

[randychase]

1.0mm pitch BGA (http://www.cpdserver.com/pcbstandards/Mentor/docs/bgap1s.pdf)

more to come...

[randychase]

SQUARE-

1.0mm spacing, 52 pin (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfp1s.pdf)

0.80mm spacing, 32-128 pin (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfp8s.pdf)

0.65mm spacing, 44-232 pin (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfp65s.pdf)

0.635mm (.025") spacing, 84-244 pins, corner polarity (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfp635s.pdf)

0.635mm (.025") spacing, 84-244 pins, center polarity (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfp635s.pdf)

0.635mm (.025") spacing, 84-244 pins, corner polarity, corner tabs (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfpbumpc.pdf)

0.635mm (.025") spacing, 84-244 pins, center polarity, corner tabs (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfpbumps.pdf)

0.50mm spacing, 24-344 pins, corner polarity (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfps5s.pdf)

0.40mm spacing, 32-432 pins, corner polarity (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfps4s.pdf)

0.30mm spacing, 48-576 pins, corner polarity (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfps3s.pdf)



RECTANGULAR-

1.0mm spacing, 64 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfp1r.pdf)

0.80mm spacing, 80 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfp8r.pdf)

0.75mm spacing, 88-100 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfp65r.pdf)

0.50mm spacing, 32-264 pins, corner polarity (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfps5r.pdf)

0.40mm spacing, 44-332 pins, corner polarity (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfps4r.pdf)

0.30mm spacing, TBD pins, corner polarity (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfps3r.pdf)

[randychase]

SQUARE-

0.8mm spacing, 4-44 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfn8s.pdf)

0.65mm spacing, 8-52 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfn65s.pdf)

0.5mm spacing, 8-80 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfn5s.pdf)

0.4mm spacing, 84-100 pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfn4s.pdf)

RECTANGULAR-

0.8mm spacing, 8-20pins (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfn8rh.pdf)

0.65mm spacing, 8-16 pins, horizontal (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfn65rh.pdf)

0.65mm spacing, 8-22 pins, vertical (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfn65rv.pdf)

0.50mm spacing, 16-32 pins, horizontal (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfn5rh.pdf)

0.50mm spacing, 24-40 pins, vertical (http://www.cpdserver.com/pcbstandards/Mentor/docs/qfn5rv.pdf)

[qycd]

could you pack all these files and post them in the forum?

[al_rfcode]

Any plans to add newer packages? These are very useful.

[Bubble]

Rounded rectangles > than rectangles

and should be used when ever possible

[dannyb]

thanks very much for making this available.

would there happen to be documentation to go with the thru-hole R/Cs as well ?