Allegro syudio inpoer error

[Prapat]

Dear Sir,
Who can help advise ?How to fix the error in below message error.



Cadence Design Systems, Inc. netrev 15.0 Wed Feb 04 16:45:11 2004
(C) Copyright 2002 Cadence Design Systems, Inc.

------ Directives ------

RIPUP_ETCH FALSE;
RIPUP_SYMBOLS ALWAYS;
MISSING SYMBOL AS ERROR FALSE;
SCHEMATIC_DIRECTORY '.';
BOARD_DIRECTORY '';
OLD_BOARD_NAME 'ffff.brd';
NEW_BOARD_NAME 'ffff.brd';

CmdLine: netrev -$ -i . -y 1 E:\PCB_Project_Design\Allegro\Project\SS542\#Taaaaaf03920.tmp

------ Preparing to read pst files ------


#1 ERROR(24) File not found
Packager files not found

#2 ERROR(102) Run stopped because errors were detected

netrev run on Feb 4 16:45:11 2004

COMPILE 'logic'
CHECK_PIN_NAMES OFF
CROSS_REFERENCE OFF
FEEDBACK OFF
INCREMENTAL OFF
INTERFACE_TYPE PHYSICAL
MAX_ERRORS 500
MERGE_MINIMUM 5
NET_NAME_CHARS '#%&()*+-./:=>?@[]^_`|'
NET_NAME_LENGTH 24
OVERSIGHTS ON
REPLACE_CHECK OFF
SINGLE_NODE_NETS ON
SPLIT_MINIMUM 0
SUPPRESS 20
WARNINGS ON

2 errors detected
No oversight detected
No warning detected

cpu time 0:00:04
elapsed time 0:00:00

[cadpro2k]

Hi Pat,

I don't know your settings, but the explaination is pretty clear... Import/Logic can't find your packager files (pst___.dat files location). Check your import setting (i.e. browse for your pst___.dat files, these would be pstchip.dat, pstxprt.dat and pstxnet.dat) and set the pointer.

Good day.

Mitch

P.S. also check out http://www.padmasters.com for additional "cadence related" information.

[dizzyvet]

First thank you for the question and answer. I am just in the learning phase of Cadence tools.

I did find the pst*.dat file in a folder named "packaged".