petrica
11-16-2003, 01:33 PM
Hello,
In order to protect a component from ESD spikes, I used a TVS (SR05 from Samtech). But the main problem is that i can't place the 2 components on the same side of the board and the reference design for that component recomends that there should be no vias between the component and the TVS.
What do you recommend me to do?
Thanks,
Petre
In order to protect a component from ESD spikes, I used a TVS (SR05 from Samtech). But the main problem is that i can't place the 2 components on the same side of the board and the reference design for that component recomends that there should be no vias between the component and the TVS.
What do you recommend me to do?
Thanks,
Petre