- Hello?
- Matrox G400/450 Bug when doing part name displays on NT
- mitered pads
- Split/Mixed vs Copper Pour
- Wish list for PowerPCB Ver 4
- Innoveda links and info for contacting support
- Netlist compare ignores non-ECO parts connected to a net
- PowerLogic/PowerPCB compare causes crash
- PowerLogic Snap to Grid not snapping
- New part type, decal is not automatically assigned
- The Decal Editor and color assignments
- Zero Width DCODEs with flooded over pads
- DFF Audit errors
- Synchronizing PCB to LOGIC and Alternate Decals
- Rats nest lines stay on planes when useing "flood over"
- ECOGEN, non-registered parts, Clusters/unions
- Soldermask not showing up (versions prior to V4)
- Parts and testpoints
- Stopping routing between pads or too close to pads?
- Embedded planes don't look at Auto Separate Gap value
- 4.0 Export then inport error
- Net not staying with pin, PowerLogic
- Copper Circles/Arcs in RS-274-X
- Space violation checking in 4.0
- Default Colors for Decal Editor
- Holes/vias in SMT pads
- Layer Associations
- color scheme simplification
- Split/Mixed Planes
- double_qoute synch. problem
- color scheme again
- Start Files and printing
- Layer Assignments
- Arc BUG
- Capture netlist to PowerPCB
- 4.01 ??
- problems in PPCB 4.0 and CAM350 v 7.0
- Part Outlines
- PowerPCB V4.01 Is Here
- Teal key and 3.5.1 PowerPCB Install
- Definitions of poured, non-poured, hatch and flood?
- Problem with "Lines" to save to Library
- Board outline
- "No Current Signal Tree" error message?
- Importing a netlist for a manual design already in progress.
- VB Script need to produce Parts List
- Spilt/mixed plane
- pcbstandards library?
- Cam output
- board outline gerber
- layer 25
- Copper pour flooding over SMT pads of same net.
- Pads Power PCB lib's...
- mysterious extra pads in artwork
- Plot Window Problem
- 2002 User Group
- Entering in a netlist after manual parts placement and routing
- What controls the display of thermal reliefs?
- Block move
- is there an easier way?
- PADS-PCB ver. 3.31
- BlazeRoute V5.0 With High Speed Rules
- Rule In Power Pcb
- How to generate teardrops on vias only?
- PowerPCB Libraries
- Decals and Parts
- Creating Components
- Macro
- Thermal relief problems
- Another question
- PowerPCB all versions!
- component height restrictions
- geometric hight attribute PRO-E
- Orcad to Pads
- DFT Audit - decal name length > 16
- Font In Powerpcb
- Powerpcb has mind of its own?
- Discover more details on PowerPCB 5.0
- High-speed PCBs require a new approach
- Via-in-Pad Problems
- Problem in sending a netlist in powerlogic to PowerPCB
- Colours
- BGA Heat Thermal
- Footprint naming
- Decal naming
- Viewing .pho files
- ECO GEN inconsistancies
- Mentor Graphics Corporation Agrees to Acquire Innoveda
- Layer stackup definiton
- Mentor aquires Innoveda. Good or bad for you? Vote
- CAM Plane Checking Program
- 3D Modeling in AutoCAD from PowerPCB....
- spilt/mixed plane
- Rules
- The Innoveda User's Conference Report
- PCI Fingers
- Plane Is Totally Flooded
- Plane Is Totally Flooded
- Laser Microvias in Land Pattern
- Creating gates in PADS parts
- Core and B-Stage layers
- PowerPCB Design Contest 2002 Winners
- Importing AutoCAD DXF to PADS
- fab house checklist
- ASCII Netlist
- Where to put the board outline
- Viewers for PowerPCB files`
- re: teardrops
- No spare symbol for size 0.8636
- PowerPCB Viewer
- Maximum number of apertures exceeded
- Cam Start Files
- Adding vias on the fly
- Aligning Gerber data
- Via aspect ratio
- How do you change the diameter of tacks?
- Thermal Via
- Flooding over vias
- Assembly Drawing for Surface Mount Parts
- Ground Plane Vias
- Autorouting
- bga fanout
- Need urgent advice!
- PADS .job files
- Problem with Split/Mixed and not clearing pads?
- Tutorials required urgently!
- How to panelise?
- Solder Mask Width
- How to break a closed polygon?
- Degree symbol for dimensioning angles
- Picking Stuff
- PowerPCB V6.0
- PowerPCB 3D Modeling Output
- Problems with PADS->CAM-350 translator
- PADS market share
- Multiple layouts on a single panel
- PCBSTANDARDS libraries?
- Quoting a pcb layout
- How to suppress parts on assy dwg?
- Text Imprt
- Use of layer 19 for 3 D
- Cam planes
- New Mentor Graphics Tech Support for PADS
- Split/mixed planes???
- Glued vias
- Composite Layers
- Pads update costs
- Soldermask keepout
- Innoveda User Group Technical Papers and Presentations
- PowerPCB V5.0 is Here! Download Instructions.
- V5.0 Not so High Speed
- More CAM350 confusion
- Drawing Mechanical
- Another PowerPCB Script
- PowerPCB Jumpers and PCBSTANDARDS
- Official Wish Lists for PowerPCB/Blaze
- Dual Monitors
- How To Load Netlist Generated From Pcad
- Network Licenses
- PADS Dialog Box Default Settings
- Verify Design...
- View Toolbar Script Available
- Moving layers
- Via Offset Script Updated
- San Diego PADS User Group
- Slotted Holes & CAM planes
- Block move but traces doesn't move
- copying circuits
- Autoroute or route by hand?
- Thermal in padstack?
- listserver
- VB and assembly option question
- Via Sharing and net rule - PART 1?
- PowerPCB V5.0 Drafting Tool Box
- problem with reuse option
- Silkscreen Outline
- Can't move
- Scroll Bars.......
- Flood over copper pour
- PowerPCB V5.0 ECO Tool Box
- board dimension and v5
- increase from 2 layer to 4 layer.. How. Please
- Merging two pcb files
- Default Dialogue Box Settings Poll
- Metric Precision
- 2 designers 1 pcb
- on screen view
- Land pattern calculator
- Vias without thermals: Bad CAM output?
- Back annotating from Pads to Orcad 9.2
- PowerPCB V5.0 Decal Editor
- PowerPCB V5.0 Custom Thermal Planes
- smaller soldermask
- PowerPCB V5 "Set Group Origin"
- PowerPCB V5 View Nets
- Fanout/Offset script Available
- How to associate copper to pin in decal?
- Unroutes
- exporting pads file to dxf.
- PwrPCB Report PartList2 VB Script
- DXF Board Outline
- Pen Plotters
- BlazeRouter - Strategy setting
- Copper Sharing & Length Minimization
- Need to Add Microns as a Unit
- PowerPCB V6
- DPAK decal for wave
- Auto Fanout/Offset Script Updated
- Glue Dots
- need gerber output from powerpcb files
- PADS Orcad Capture question
- Suggestion for a new Topic
- How to change 2D-line to copper
- pin pairs
- Cadstar API?
- Logical pin vs. physical pin
- Pour won't flood when associated
- keyholes
- Sharing time saving scripts
- 2D lines
- Latium errors
- Trace thickness for a hot board.
- Engineer vs PCB Designer
- Trace clearance for high voltage
- associated copper in the wrong layer
- Setup / Jumpers
- Land Pattern Calculator
- Trace get ripe off after ECO
- Movving the database origin?
- ColorView Toolbar V3.2 Vb Script
- Drill/Fab dwg's for blind/buried via's
- ColorView Toolbar
- ColorView Toolbar 3.3
- Fiducial
- Pads Listserver
- What size trace width is your default?
- Assembly drawings with component values
- Burn in board design
- Drawn pads or flashes?
- Ground Plane
- how Input photo to silkscreen layer ?
- Suppressing Solder Paste For Fiducial
- Please tell me ?
- PADS User Group
- HOW do you blokes know your decal is correct.
- Renaming part types and decals in Pads for use in Circuit Works
- New library entry
- Copper Pour question ??
- determine Placement ??
- Official Bug list list for PowerPCB/Blaze V5