PDA

View Full Version : Advanced Designer Certification

  1. What does it take?
  2. IPC Designer Learning Symposium
  3. IPC CID+ Exam
  4. CID+ Questions
  5. Board Material Can Effect Board Design
  6. Different Materials & Properties
  7. The benefits of Organic & Inorganic Materials
  8. Key Environmental Material Properties
  9. Polyimide Materials
  10. Physical Board Dielectric Parameters
  11. What Controls CTE and Tg?
  12. Homogenous Material Performance Capability
  13. V-Scoring
  14. Signal Integrity Analysis
  15. Formation of Blind and Buried Via
  16. Layout Approaches for Crosstalk Minimization Part 1
  17. Layout Approaches for Crosstalk Minimization Part 2
  18. Layout Approaches for Crosstalk Minimization Part 3
  19. Layout Approaches for Crosstalk Minimization Part 4
  20. Layout Approaches for Crosstalk Minimization Part 5
  21. Solder Mask & BGA's Part 1
  22. Solder Mask & BGA's Part 2
  23. EMI Emission/Susceptibility
  24. Solder Mask Material Properties
  25. Solder Mask Tenting
  26. Surface Finish and Treatment Characteristics
  27. Surface Finish and Treatment Characteristics Part 2
  28. Highly Accelerated Stress Test Evaluations Part 1
  29. Highly Accelerated Stress Test Evaluations Part 2
  30. Highly Accelerated Stress Test Evaluations Part 3
  31. Assembly Test Implementation Part 1
  32. Assembly Test Implementation Part 2
  33. Assembly Test Implementation Part 3
  34. Assembly Cleaning
  35. General Principals of Impedance Control (Part 1)
  36. General Principals of Impedance Control (Part 2)
  37. General Principals of Impedance Control (Part 3)
  38. General Principals of Impedance Control (Part 4)
  39. General Principals of Impedance Control (Part 5)
  40. Principals of Impedance Control (Part 6)
  41. Principals of Impedance Control (Part 7)
  42. Principals of Impedance Control (Part 8)
  43. Principals of Impedance Control (Part 10)
  44. Principals of Impedance Control (Part 9)
  45. Power and Ground Routing Techniques (Part 1)
  46. Power and Ground Routing Techniques (Part 2)
  47. Power and Ground Routing Techniques (Part 3)
  48. Printed Board Tolerance Analysis (Part 1)
  49. Printed Board Tolerance Analysis (Part 2)
  50. Printed Board Tolerance Analysis (Part 3)
  51. Printed Board Tolerance Analysis (Part 4)
  52. CID, CID+.....Is it worth it?
  53. Cid
  54. CID advice
  55. mcse exam preps ?
  56. CID and CID+